Disclosure Integration of Lean Six Sigma Principles in Sustainable Supply Chain in Poultry Industry
Abstract
The poultry industry has been in the spotlight for its enormous potential economic development. However, poultry industry is still not implementing the concept of sustainability properly. There are still many wastes that have not been managed properly and there are still many problems in the supply chain that require more systematic handling. Many studies have shown that the implementation of Lean Six Sigma (LSS) and sustainability has positive results on the company's bottom line performance. This research tried to integrate the application of LSS principles and sustainability along the supply chain in the poultry industry in Indonesia. Data were collected from 4 listed poultry firms in Indonesia. The research method used SEM PLS with SmartPLS software. The results showed that supply chain security management system disclosure as the principle of LSS had a positive effect on the collaboration of supply chain disclosure and collaboration of supply chain disclosure had a positive effect on sustainability. The results also showed that risk management disclosure had a negative effect on the collaboration of supply chain disclosure and economic sustainability had a negative effect on environmental sustainability, but social sustainability had a positive effect on environmental sustainability. Based on the results of this study, there is a need to improve supply chain security management system and supply chain collaboration in order to advance sustainable poultry industry.
Downloads
References
Banawi, A., & Bilec, M. M. (2014). A framework to improve construction processes: Integrating lean, green and six sigma. International Journal of Construction Management, 14(1), 45–55. https://doi.org/10.1080/15623599.2013.875266
Benitez, J., Henseler, J., Castillo, A., & Schuberth, F. (2020). How to perform and report an impactful analysis using partial least squares: Guidelines for confirmatory and explanatory IS research. Information and Management, 57(2), 103168. https://doi.org/10.1016/j.im.2019.05.003
BPS. (2020). Statistik Perusahaan Peternakan Unggas 2019.
Cherrafi, A., Elfezazi, S., Chiarini, A., Mokhlis, A., & Benhida, K. (2016). The integration of lean manufacturing, Six Sigma and sustainability: A literature review and future research directions for developing a specific model. Journal of Cleaner Production, 139, 828–846. https://doi.org/10.1016/j.jclepro.2016.08.101
Cherrafi, A., Elfezazi, S., Govindan, K., Garza-Reyes, J. A., Benhida, K., & Mokhlis, A. (2016). A framework for the integration of Green and Lean Six Sigma for superior sustainability performance. International Journal of Production Research, 55(15), 4481–4515. https://doi.org/10.1080/00207543.2016.1266406
Dagri, P. (2016). Kajian kebijakan Persaingan Usaha di Sektor Perunggasan.
de Oliveira, U. R., Marins, F. A. S., Rocha, H. M., & Salomon, V. A. P. (2017). The ISO 31000 standard in supply chain risk management. Journal of Cleaner Production, 151(October), 616–633. https://doi.org/10.1016/j.jclepro.2017.03.054
Dora, M., & Gellynck, X. (2015). Lean Six Sigma Implementation in a Food Processing SME: A Case Study. Quality and Reliability Engineering International, 31(7), 1151–1159. https://doi.org/10.1002/qre.1852
Drohomeretski, E., Gouvea Da Costa, S. E., Pinheiro De Lima, E., & Garbuio, P. A. D. R. (2014). Lean, six sigma and lean six sigma: An analysis based on operations strategy. International Journal of Production Research, 52(3), 804–824. https://doi.org/10.1080/00207543.2013.842015
Garza-Reyes, J. A. (2015). Green lean and the need for Six Sigma. International Journal of Lean Six Sigma. https://doi.org/10.1108/IJLSS-04-2014-0010
Hair, J. F., Hult, G. T. M., Ringle, C. M., & Sarstedt, M. (2014). Partial least squares structural equation modeling (PLS-SEM). In Sage Publisher.
Hair, J. F., Ringle, C. M., & Sarstedt, M. (2011). PLS-SEM: Indeed a silver bullet. Journal of Marketing Theory and Practice, 19(2), 139–152. https://doi.org/10.2753/MTP1069-6679190202
Jamarizal, -, Suryahadi, -, & Syarief, R. (2018). Strategi Pemasaran DOC Ayam Ras Pedaging pada CV Missouri, Bandung Jawa Barat. MANAJEMEN IKM: Jurnal Manajemen Pengembangan Industri Kecil Menengah, 12(2), 170. https://doi.org/10.29244/mikm.12.2.170-177
Jiang, B. (2009). The effects of interorganizational governance on supplier’s compliance with SCC: An empirical examination of compliant and non-compliant suppliers. Journal of Operations Management, 27(4), 267–280. https://doi.org/10.1016/j.jom.2008.09.005
Kementan. (2019a). Buku Outlook Komoditas Peternakan Daging Ayam Ras Pedaging. In Angewandte Chemie International Edition (Vol. 6, Issue 11).
Kementan. (2019b). Statistik Peternakan dan Kesehatan Hewan. Livestock and Animal Health Statistics. Jakarta.
Lalonde, C., & Boiral, O. (2012). Managing risks through ISO 31000: A critical analysis. Risk Management, 14(4), 272–300. https://doi.org/10.1057/rm.2012.9
Marques, P., Requeijo, J., Saraiva, P., & Frazao-Guerreiro, F. (2013). Integrating six sigma with iso 9001. International Journal of Lean Six Sigma, 4(1), 36–59. https://doi.org/10.1108/20401461311310508
Marrugo, E., Sierra, C., Calderon, D., & Ferreira, C. (2017). Integrated Management System Based on the OHSAS 18001: 2007 and ISO 28000: 2006 Standards for a Logistic Services Company. International Journal of Engineering and Applied Sciences, 4(7), 257410.
Martens, M. L., & Carvalho, M. M. (2016). Sustainability and Success Variables in the Project Management Context: An Expert Panel. Project Management Journal, 47(6), 24–43. https://doi.org/10.1177/875697281604700603
Miller, G., Pawloski, J., & Standridge, C. (2010). A case study of lean, sustainable manufacturing. Journal of Industrial Engineering and Management, 3(1), 11–32. https://doi.org/10.3926/jiem.2010.v3n1.p11-32
Narimissa, O., Kangarani-Farahani, A., & Molla-Alizadeh-Zavardehi, S. (2020). Evaluation of sustainable supply chain management performance: Indicators. Sustainable Development, 28(1), 118–131. https://doi.org/10.1002/sd.1976
Sá, J. C., Vaz, S., Carvalho, O., Lima, V., Morgado, L., Fonseca, L., Doiro, M., & Santos, G. (2020). A model of integration ISO 9001 with Lean six sigma and main benefits achieved. Total Quality Management and Business Excellence, 0(0), 1–25. https://doi.org/10.1080/14783363.2020.1829969
Sakumoto et al. (2019). Using Lean Six Sigma to Increase Efficiency of a Grain Receipt Process of a Brazilian Agroindustry Cooperative. American Journal of Engineering and Applied Sciences, 12(2), 214–226. https://doi.org/10.3844/ajeassp.2019.214.226
Saptana, N., & Yofa, R. D. (2016). Penerapan Konsep Manajemen Rantai Pasok Pada Produk Unggas. Forum Penelitian Agro Ekonomi, 34(2), 143. https://doi.org/10.21082/fae.v34n2.2016.143-161
Sobral, M. C., Sousa Jabbour, A. B. L. de, & Chiappetta Jabbour, C. J. (2013). Green benefits from adopting lean manufacturing: A case study from the automotive sector. Environmental Quality Management, 22(3), 65–72. https://doi.org/10.1002/tqem.21336
Varsei, M., Soosay, C., Fahimnia, B., & Sarkis, J. (2014). Framing sustainability performance of supply chains with multidimensional indicators. Supply Chain Management, 19(3), 242–257. https://doi.org/10.1108/SCM-12-2013-0436
Wijethilake, C. (2017). Proactive sustainability strategy and corporate sustainability performance: The mediating effect of sustainability control systems. Journal of Environmental Management, 196, 569–582. https://doi.org/10.1016/j.jenvman.2017.03.057
Wirkus, M., & Chmielarz, A. (2018). Integration of lean management with ISO management systems in enterprise. Management and Production Engineering Review, 9(3), 100–107. https://doi.org/10.24425/119539
Younis, F., & Chaudhary, M. A. (2020). Sustainable Development: Economic, Social, and Environmental Sustainability in Asian Economies. Forman Journal of Economic Studies, 15(100551), 87–114. https://doi.org/10.32368/fjes.2019150
Copyright (c) 2021 Ratna Yulia Kusumastuti, Heti Mulyati, Gendut Suprayitno
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
